Mode Change, Activation Times And 3-Stop - wissner-bosserhoff sentida Gebrauchsanweisung

6.3 Mode change, activation time and 3-stop
Changing modes
Activating care mode
Press and hold the comfort position or prevention automatic button for at least 3 seconds.
Locking the handset
Press and hold the backrest and height adjustment button simultaneously for at least 5 se-
conds until the LED briefly lights up yellow and then permanently lights up green.
Activation times
The activation time is the time in which an adjustment can be made after the
handset or a specific function has been activated.
- When moving the handset
- Selection of a function
- Activation of care mode
Comfort exit / 3-stop strategy
When the height is being adjusted up or down, the bed stops in the comfort exit position. To
continue the movement, the corresponding adjustment button on the handset must be relea-
sed and then pressed again.
96
/
+
approx. 20 sec.
approx. 16 sec.
approx. 2 min.
STOP
STOP