Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Centering the Control Surfaces
When the transmitter is switched on and the flight battery is connected to the controller (and
installed in the battery box), it is now possible to connect the control wires to the rudder and
treble control surfaces and to center the surfaces accordingly.
Rudder
properly
centered
Observe the rudder to ensure it is properly centered as shown above.
Elevator
properly
centered
Observe the elevator to ensure it is properly centered as shown above.
12. Depending on which function you need,
put on the camera mount(for FPV flight) or
the canopy(for regular flight).
Rudder NOT
properly
centered
Elevator NOT
properly
centered
18 / 28
Werbung
Inhaltsverzeichnis
