Gemü Q50 eSyStep Betriebsanleitung Seite 86

11 Specific data IO-Link (pin 6)
Description of parameter values
Index name
Failure counter
Motor unable to move
11.4.30 Analog values
Different analog values can be read out with the Analog values parameter.
Index Sub- Off- Access
Index set Rights
0x60 1 0 RO
2 16 RO
3 32 RO
Description of parameter values
Index name
Analog values
GEMÜ Q50 eSyStep
Parameter
Undervoltage 0 ... 65.535
Temperature error 0 ... 65.535
0 ... 65.535
Internal error 0 ... 65.535
Emergency power 0 ... 65.535
Potifail open 0 ... 65.535
Potifail close 0 ... 65.535
Overcurrent out 1 0 ... 65.535
Overcurrent out 2 0 ... 65.535
Length Index name
12 bits Analog values
12 bits
12 bits
Parameter
Potentiometer
Supply voltage
Temperature
Values
Number of undervoltage errors (U < 17.4 V)
Number of actuator switch-offs due to excessive motor tem-
perature
Number of motor errors
Number of internal errors
Number of emergency power cases
Number of times the actuator has moved to its mechanical
stop OPEN.
Number of times the actuator has moved to its mechanical
stop CLOSED.
Number of times output 1 has switched off due to excessive
output current.
Number of times output 2 has switched off due to excessive
output current.
Parameter
Potentiometer
Supply voltage
Temperature
Values
0 ... 4095 Read out current analog value of the potentiometer.
0 ... 4095 Read out current analog value of the supply voltage.
0 ... 4095 Read out current analog value of the temperature sensor.
86 / 100
Description
Type Values
uint:16 0 ... 4095
uint:16 0 ... 4095
uint:16 0 ... 4095
Description
www.gemu-group.com