Gemü Q50 eSyStep Betriebsanleitung Seite 84

11 Specific data IO-Link (pin 6)
11.4.25 Actuator position feedback
The settings for the OPEN and CLOSED position feedback can be stored with the Actuator position feedback parameter.
Index Sub- Off- Access
In- set Rights
dex
0x51 1 0 R/W
2 16 R/W
3 32 RO
4 48 RO
Description of parameter values
Index name
Actuator position feed-
back
11.4.26 Initialized positions
The analog values of the initialized valve positions can be read out with the Initialized positions parameter.
Index Sub- Off- Access
In- set Rights
dex
0x53 1 0 RO
2 16 RO
3 32 RO
Description of parameter values
Index name
Initialized positions
GEMÜ Q50 eSyStep
Length Index name
10 bits Actuator position
feedback
10 bits
10 bits
10 bits
Parameter Values
Open request 30 ... 970
(3.0 ... 97.0%)
Close request 30 ... 970
(3,0 ... 97,0%)
Open real 0 ... 4095
Close real 0 ... 4095
Length Index name
12 bits Initialized
positions
12 bits
12 bits
Parameter Values
Open 0 ... 4092
Close 0 ... 4092
Stroke 0 ... 4092
Parameter Type
Open request uint:16
Close request uint:16
Open real uint:16
Close real uint:16
Request valve position OPEN
Request valve position CLOSED
Real valve position OPEN
Real valve position CLOSED
Parameter Type
Open uint:16
Close uint:16
Stroke uint:16
Analog value valve position OPEN
Analog value valve position CLOSED
Analog value stroke (difference between OPEN and
CLOSED).
84 / 100
Default Values
900 30 ... 970
(90,0%) (3,0 ... 97,0%)
100 30 ... 970
(10.0%) (3.0 ... 97.0%)
0 ... 4095
0 ... 4095
Description
Default Values
0 0 ... 4092
4092 0 ... 4092
0 0 ... 4092
Description
www.gemu-group.com