English - Johnson Pump SPX Ultima Combo L450 UC Bedienungsanleitung

Submersible bilge pump with Ultima switch
Submersible bilge pump for pumping bilge water in marine environment. To be instal-
led in the keelson.
Security
• The pump may not be used for other liquid than water/bilge water.
• Always install the pump according to wiring diagram, page 16.
• Always use the fuse required, see Design features below.
• The wire connections must be sealed with a marine sealant, eg vaseline, silicone
or grease.
• Insulation or cable sheathings must be placed above the highest bilge water
level.
• Do not run dry.
Operation
See illustration page 15.
1. When the bilge water rises and reaches the second detector cell at 50 mm (2")
the switch starts the pump, with a 3 second delay.
2. When the water level has sunk to a level of 20 mm (¾"), and the first detector
cell is above the water level, the pump is stopped.
Type designation
Pumptype EU
Pumptype US
Part No EU 12V
Part No US 12V
Part No EU 24V
Part No US 24V
Design features
EU
US
Hose size
Capacity, straight
(13.6 V)
Capacity, 1 m head 33 l/min/
(13.6 V)
Voltage
Amperage
FUSE SIZE
HEIGHT
Max dimension
Weight
Body
Shaft
Shaft seal
Wire size
Original instructions
L450 UC L550 UC
500 GPH 750 GPH
32-1450UC-01 32-1550UC-01 32-1650UC-01
07503-00 07703-00
- -
- -
L450 UC
500 GPH
3/4"
40 l/min/
630 GPH
525 GPH
12 V DC
2,5 A
5 A
112 MM
75x100 mm
0.40 kg
Thermoplastic Thermoplastic Thermoplastic
Stainless steel Stainless steel Stainless steel Stainless steel
Lip seal
0.75 mm
2
L650 UC
1000 GPH
07903-00
32-1650UC-01-24 32-1750UC-01-24
07903-24
L550 UC L650 UC
750 GPH 1000 GPH
3/4" 3/4"
50 l/min/ 63 l/min/
800 GPH 1000 GPH
44 l/min/ 50 l/min/
700 GPH 800 GPH
12 V DC 12 V/24 V DC 12 V/24 V DC
3 A 3,2 A / 2 A
5 A 5 A / 3 A
112 MM 112 MM
75x100 mm 75x100 mm
0.40 kg 0.40 kg
Lip seal Lip seal
0.75 mm 0.75 mm
2
> English
L750 UC
1250 GPH
32-1750UC-01
08203-00
08203-24
L750 UC
1250 GPH
1.1/8"
73 l/min/
1150 GPH
60 l/min/
952 GPH
3 A / 2 A
5 A / 3 A
112 MM
75x100 mm
0.45 kg
Thermoplastic
Lip seal
0.75 mm
2 2
5