English - Johnson Pump SPX Flow Viking Power 16 Bedienungsanleitung

> English
Viking Power 16 mounted to DC motor 12/24 V
Please follow all instructions before attempting an installation.
Typical applications
drain, waste water and bilge pumping. Its compact
design and flexible orientation give a very adapt-
able mounting and installation in the boat.
Model number
Viking Power 16 12V 10-13350-03
Viking Power 16 24V 10-13350-04
Features
tion
connectors included. 90° as accessory.
ard for boats up to 12 m/40 feet
Working principle
obtain good self-prming ability and a filter-less so-
lution, the pump is designed with a large single dia-
pushed through the valves in each stroke and any
debris is flushed through.
6
Technical description
Body: Nylon
Valves:
Nitrile
Diaphragm:
Reinforced nitrile
Connection:
tors included. 90° as accessory
Fasteners:
Stainless steel
Fot:
Painted zink plated steel
Max. head:
Max.
suction lift:
Max head
& lift:
Motor:
30 W at 1 m head
-
thermal protection)
Fuse size:
8 A – 12V / 4 A – 24V
standards:
tection against ignition of surrounding flammable
gases
ated bilge pumps
-
– Extra-low voltage DC installations
Drawing
See page 25
Pressure and Capacity data
Pressure Flow
Bar kPa Psi L/min USGPM
0 0 0 16.2
0.1 10 1.5 15.1
0.2 20 2.9 13.7
0.3 30 4.4 12.5
0.4 40 5.8 11.3
Fuse required
-
Amp. draw
12V 24V
4.2 2.0 1.0
4.0 2.3 1.2
3.6 2.8 1.4
3.3 3.4 1.7
3.0 4.0 1.9
8 A 4 A
Original instructions
-
-