Spare Parts And Accessories; Disposal; Disposing Of Blower; Ec Declaration Of Conformity - Stihl BGA 100 Gebrauchsanleitung

19 Spare Parts and Accessories

– Vibration level a measured according to
hv
EN 50636-2-100, control handle: < 2.5 m/s².
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
18.3 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19 Spare Parts and Accesso‐
ries
19.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

20 Disposal

20.1

Disposing of Blower

Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
0458-711-9621-C
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
21 EC Declaration of Con‐
formity
21.1 STIHL BGA 100 Blower
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Type: Cordless blower
– Manufacturer's brand: STIHL
– Model: BGA 100
– Serial number: 4866
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and built in
compliance with the versions of the following
standards valid at the production date:
EN 55014‑1, EN 55014‑2, EN 60335‑1 and
EN 50636‑2‑100.
The measured and guaranteed equivalent sound
power level has been determined in accordance
with Directive 2000/14/EC, Annex V.
– Measured sound power level: 88 dB(A)
– Guaranteed sound power level: 90 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of construction, the country of manufac‐
ture and the machine number are shown on the
blower.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
English
27