Vortice VORT NRG EC 3000 Bedienungs- Und Inbetriebnahmeanleitung Seite 14

ENGLISH
VI.4 Electric board's terminal
29 30 31 32
38 39 40
Power terminal and accessories
for fan operations
(on upper DIN rail)
VI.4.1 Power terminal connection
29 30 31 32 33 34
38 39 40 41 42 43
Power terminal and
accessories for fan operation
(on upper DIN rail).
33 34 35 36 37
41 42 43 44 45 46
Name
DEP S
SUPPLY AND
RETURN AIR MOTOR
DEP S
35 36 37
44 45 46
BE regulator
(PREMIUM and
INFINITE BE only)
DEP FS
THS (PREMIUM and
INFINITE BE only)
1 2 3 4 5 6
15 16 17 18 19 20
Control terminal
(on lower DIN rail)
Terminals Connection
29-30 To be connected to terminals 1 and 3 of the DEP
airflow control pressure switch on supply air fan
set at 30Pa (note: the safety of the airflow shall be
managed by the pressure transmitter if using the
LOBBY, QUATTRO or MAC2 option. In this case do
not connect anything to these terminals).
31-32-33- According to VORT NRG EC size (see section VI.5)
34-35-36-
40-41
38-39 To be connected to terminals 1 and 3 of the DEP
airflow control pressure switch on return air fan set
at 30Pa (note: the safety of the airflow shall be
managed by the pressure transmitter if using the
LOBBY, QUATTRO or MAC2 option. In this case do
not connect anything to these terminals).
42-43 For VORT NRG EC PREMIUM BE and VORT
NRG EC INFINITE BE only, connect to terminals 1
and 2 of the BE regulator (see section VI.15)
44-45 To be connected to terminals 1 and 3 of the DEP
fouling pressure switch of the supply air filter (set
at 200 Pa)
37-46 For VORT NRG EC PREMIUM BE and VORT NRG
EC INFINITE BE only, connect to terminals C and 2 of
the electric coil's safety thermostat (see section VI.15)
7 8 9 10 11 12
21 22 23 24 25 26
13 14
27 28
14