Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CYL LIGHT SLIM | ENG |
CYL LIGHT SLIM
GENERAL FEATURES
The CYL LIGHT SLIM product line is
composed
of
fixed
surface-mounted
projectors.
CYL LIGHT SLIM conforms to directives:
• 2006/95/EC (LV)
• 2004/108/EC (EMC)
• 2009/125/EC (Ecodesign)
• 2002/96/EC (WEEE)
• 2011/65/EC (RoHS)
and to safety standards:
• EN 60598-1
• EN 60598-2-1.
For more technical information about
the product (photometric, electrical data,
size, weight, certification, etc.) refer
to the catalogue or access the product
datasheet on the website:
www.reggiani.net/reference.
www.reggiani.net
ASSEMBLY INSTRUCTIONS
WARNINGS
Before assembling the projector, carefully
read these instructions to make sure the
luminaire functions correctly and safely.
Keep the instructions in a safe place for
future consultation; contact your supplier
for any problems that may arise.
The projector must not be modifi ed.
Modifying the luminaire in any way
invalidates the guarantee of conformity
with standards and directives in force
and it could make the actual projector
hazardous.
Reggiani SPA Illuminazione shall not be
held liable for any damage caused by
one of its projectors if not assembled in
conformity to the following instructions.
The projector must be installed in
accordance
with
the
standards.
Before connecting the projector, make
sure the mains power supply corresponds
to the power indicated on the projector
label.
The electrical installation the projector is
connected to must be wired in conformity
to the laws in force.
010
As a safety guarantee, any components
damaged
replaced with the same components
before the projector is used again.
The minimum distance between the
projector and the lighted object must be
0.8 m for METAL HALIDE LAMPS.
Never cover the projector during use.
Never use abrasives or solvents to clean
the glass.
best
working
while
operating
must
be
Werbung
