Mounting And Installation; Surrounding Conditions; Mounting The Product; Removing The Casing - Vaillant VWZ MEH 61 Installationsanleitung Und Betriebsanleitung

MOUNTING AND INSTALLATION

4.1.2.2 Distance to infl ammable parts
∙ Make sure that no item that can easily catch fi re is in
direct contact with the components, which may reach a
temperature greater than 80°C.
∙ Make sure that there is a minimum distance of 200 mm
between items that can easily catch fi re and the hot
surfaces.
4.1.2.3 Mounting clearances
∙ Ensure the distances indicated on the diagram.
This will ensure that the connections to the water can be
accessed and inspected.
Additional clearances around the appliance may be
advantageous for its installation and maintenance.
20
min. min.
i Notes
* Clearance necessary for the installation or
maintenance of the appliance.
4.1.3 Considering the product location
4.1.3.1

Surrounding conditions

∙ Do not install the product above another product that
could damage it (for example, above a cooker that might
emit steam or grease) or in a room, which has a lot of
dust in the atmosphere which is corrosive.
∙ Do not install the product under another product that
might leak.
∙ Make sure that the room where you want to fi t the
product is suffi ciently protected against frost.
4.1.3.2 Properties of the mounting surface
∙ Before choosing a site for the product, carefully read
the safety warnings and instructions in the operating
instructions and installation instructions.
∙ Ensure that the wall to which the product will be mounted
on is structurally safe in order to support the weight of the
product.
26
20
>600*
4.2

Mounting the product

4.2.1

Removing the casing

1
A
2
Key
1 Front façade attachment screw
2 Front casing
∙ Remove the front cover of the appliance complying with
the order of operations (A) and (B).
B
0020166663_00 - 05/13 - Vaillant