Behaviour In An Emergency Situation; Safe Handling Of Fuels; Description Of Device / Spare Parts; Assembly - Altrad ATIKA V-HB 8200 Originalbetriebsanleitung, Sicherheitshinweise, Ersatzteile

Behaviour in an emergency situation


Initiate all required first aid measures suited for the injury and seek
qualified medical advice as quick as possible.

Protect the injured person against further injuries and immobilise
the injured person.
Safety Precautions - Safe handling of fuels
Fuels and fuel vapours are inflammable and may cause
serious injury on the skin or when inhaled. Therefore be
careful and provide sufficient ventilation when handling
fuels.

Do not smoke and avoid open flames when fuelling.

Wear gloves when fuelling.

Do not fuel in closed rooms.

Stop the machine and allow it to cool down.

Carefully open the tank cap to relieve possible overpressure.

Avoid spilling of fuel or oil. Clean the device immediately when you
have spilled fuel or oil. Change your clothes immediately when you
have spilled fuel or oil on them.

Make sure no fuel can enter the soil.

Carefully close the tank cap after fuelling and check that it does not
get loose during operation.

Check that there is no leakage on the tank cap and fuel lines. If
there are leaks this product may not be started.

Never use a device with damaged ignition cable and spark plug
connector.Risk of sparking.

Only transport and store fuels in containers approved and identified
for this purpose

Keep children away from fuels.

Do not handle and store fuels close to combustible and highly
inflammable materials as well as sparks and open flames.

Go away at least three metres from the fuelling place to start the
machine.
18

Description of device / spare parts

 Please refer to the attached assembly and operating
instruction sheet.
Pos Name
(in part
without
illustr.)
1 Gasoline engine
2 Handle
2a Guide bar
3 Throttle lever
4 Star grip screw M10 x 45
5 Angel plate with rubber stop
6 Wheel
7 Axle
8 Securing pin
9 Chassis
10 Pin dia. Ø 14 x 100
11 Rubber mat
12 Clamping plate
13 Eccentric oil filler plug
14 Sealing ring for eccentric oil filler plug
15 Tank cap
16 Fuel inlet filter
17 Fuel tank
18 Choke lever
19 Ignition switch
20 Cranking rope handle
21 Cranking rope
22 Belt cover
23 Lock nut
24 V-belt
25 Tensioning screw for V-belt
26 V-belt pulley for motor
27 V-belt pulley for eccentric
28 Air filter cover
29 Air filter
30 Foam filter
31 Paper filter
32 Spark plug connector
33 Spark Plug
34 Spark plug socket spanner
35 Silencer/exhaust outlet
36 Oil drain hose
37 Motor oil filler plug
37a Sealing ring for oil drain plug
38 Air filter seal
39 Transport linkage
40 Transport frame right
41 Transport frame left
42 Safety label

Assembly

Handle
Modell V-HB 8200:
Unfold the guide bar (2a).
Secure the handle (2) with 2 hexagon screws M 8 x 50,
2 washers and 2 nuts on the guide bar (2a).
Secure the angle plate (5) with the star grip screw (4), on the
guide bar (2a).
Order number .
V-HB V-HB
8200 13000
- -
372932
372982 -
372921
372995
372994
372915
372916
372910
372918
372908
372989 372920
372990 372919
372944
372927
372535 359353
372931
- -
-
- -
- -
- -
372977 372940
- -
372996 372997
- -
- -
- -
372967
- -
372970
372971
385671
372964
381846
-
372934
372965 -
- -
- -
372980 372913
372991 372998
372992 372999
372907