WEBTEC HPM7000 Bedienungsanleitung Seite 115

5 Select the storage medium (e.g. USB1) in the Storage location
area.
6 Select the data backup required from the Backup file area.
IMPORTANT
Data loss will occur if the process is stopped.
The data restored could be incomplete if the process is stopped.
► Before starting the process, ensure that the battery is charged
to at least 50% or the device is connected to the main power via
the power adapter.
7 Tap on the button.
Ä The data restoring process is performed. The process may take
a few minutes.
Operation
115