Time Setting - Carrier XCT7 Installations- Und Benutzerhandbuch

Operation
Time
When the time icon is flashing, press Enter to go to the time interface.
(1) For e.g., if the displayed default date is December 12th, 2014, time is 12:00PM and the weekday is Friday, then
adjust the time setting in the same way as schedule setting.
(2) The default format is 12-hour and Month/Day/Year.
Extra Function
Press Enter key in the setting interface when the icon is flashing in the menu.
(1) The indoor unit decides the default information for each function except the 'Child lock'. The 'Child lock' function
is OFF in the setting by default.
(2) Move the arrows using the 'Up/Down' or 'Left/Right' key. Arrows will display statically when you press the Enter
key. Press the Left/Right key to choose the "ON" or" OFF" function. After setting, press 'Up/Down' key to confirm
and move to the above or below function directly or press the Enter key to reset.
(3) The corresponding function icon will display in the main interface when a function is set in 'Extra Function'.
(4) Some functions are not available for some models, these will be greyed out. Turbo and Quiet function will conflict
with each other, hence, cannot be 'ON' at the same time. Setting one will disable the other. This is the same for
Health airflow up and down.
(5) When the setting of the 'Child lock' is ON, the interface automatically skips to the main display. This function can
be set or cancelled by pressing Left and Right key together for 5s in the main interface.
Time

Time setting

Date format
setting
Return
M o n d a y
2011.11.03
2014 9
year month
8 27
PM
hour minute
12-hour 24-hour
Year/Month/Day Month/Day/Year
Day/Month/year
Enter
10
10:30
AM
13
day
Mon.
week
Main