Carrier XCT7 Installations- Und Benutzerhandbuch Seite 20

Operation
Mode selection
Different mode combinations can be set according to each application
New/old protocol
Self-adaption is default. The function is used for basic settings. It is recommended not to rest it or the controller may
not function normallty.
Power off memory
If the setting of the function is on, wired controller will maintain the previous state in temperature, fan speed ,etc from
in outage to power up again.
Master/Slave set
Wired controller can be set as master controller or slave controller through this function. Slave controller can only
control parts of function
Basic Setting
Auto Heat Dry Cool Fan
Dry Cool Fan
Heat Dry Cool Fan
Mode
selection
Cool Heat Fan
Auto By-pass Recovery
Heat only
Hot water
Return
Basic Setting
Outdoor fan
fixed speed
Power off
memory
Master/Slave
set
Return
M o n d a y
2011.11.03
Enter
M o n d a y
2011.11.03
grade rotational speed
ON OFF
Master Slave
Enter
18
10:30
AM
Main
10:30
AM
Main