Safety Rules - LGB MZS Zentrale III Bedienungsanleitung

All manuals and user guides at all-guides.com
- Locomotives go too slowly.
- Does the power supply have suffi-
cient output for the number of
locomotives?
- Does the Central Station have suf-
ficient capacity for the number of
locomotives?
capacity of the Central Station is 5
amps. If you need more power
output, use the LGB 55090 MTS
Power Extender to power a sepa-
rate track section.
- Two locomotives respond to a
command from one MTS throttle.
- Are the locomotives set to the
same address? Reprogram one
locomotive to a different address.
- Locomotives don't respond
instantly to speed/direction
commands.
- To protect the locomotives, the
Multi-Train System
delayed acceleration and braking.
Allow extra time and space for
starting and stopping.
Attention! When using locomotives
from manufacturers other than LGB
and LGB of America are not liable for
any damages.

Safety Rules

For your safety, please observe these
rules. Violating these rules voids
your warranty.
The LGB Multi-Train System is not a
toy.
Do not connect the LGB Multi-Train
System and a conventional analog
power supply to the same layout.
Do not use a powered catenary sys-
tem together with the LGB Multi-
Train System on the same layout.
(You can use an unpowered catenary
for prototypical appearance.)
16
The maximum
features
Do not connect two or more Central
Stations to your layout.
For safety and reliability, operate this
model with LGB power supplies
(transformers and power packs)
only.
Do not connect the phone-style con-
nectors of MTS products to your
phone system. The MTS product will
be destroyed immediately!
Install the Central Station in a venti-
lated space. Do not block the ventila-
tion slots of the Central Station. Do
not put anything into the ventilation
slots. Protect the Central Station
from moisture.
If there is a short circuit, remove the
cause immediately.
Do not connect the Central Station
directly to house current.
Check the components of the Multi-
Train System regularly. Do not use
the system if any component is dam-
aged.