Lifting; Transport; Regulations For Safe Use And The; Prevention Of Accidents - Checchi & Magli VR76 Bedienungsanleitung

6.0 - LIFTING

6.1 - Check that the lifting gear, hooks, ropes, chains, etc., are of sufficient capacity
for the task (see weight indicated on machine data plate and in the weights and
measures table).
6.2 - Fix hooks, ropes, chains, etc., in the three positions shown in fig. 3.
6.3 - Operate the lifting system slowly and before lifting definitively, make certain that
no deviation occurs and that there are no members of the public in the work area.
6.4 - Keep at a safe distance and do not for any reason enter areas subject to the
risk of accidental falling of the machine.

7.0 - TRANSPORT

Check that the vehicle to be used is suitable in terms of capacity, size and any other
respect stipulated in the highway code.
Position the machine in such a way that it does not protrude beyond the profile of the
vehicle, and fix it adequately with ropes or other means so as to prevent uncontrolled
movements.

8.0 - REGULATIONS FOR SAFE USE AND THE

PREVENTION OF ACCIDENTS

8.1 - Read all the instructions before using the machine, especially those which
relate to safeguarding against physical injury. The Manufacturer accepts no
responsibility for any damage arising from improper use of the machine or failure to
observe these instructions.
It is the duty of the user to
inform employees and other
personnel of the directions set
out in this document (this is
a legal requirement).
8.2 - Pay attention to the
danger symbols shown in
this manual and on the
machine.
8.3 - Adjustment, maintenance
or work of any kind on the
machine must be carried out
only with the engine OFF,
the machine resting on the
ground, and the tractor
chocked.
26
VR76
FIG. 3