Eu Declaration Of Conformity - Watson Marlow Pumps 300 Serie ATEX Bedienungsanleitung

Watson-Marlow Limited
Falmouth
Cornwall
TR11 4RU
England
1. 300 Series, ATEX compliant, peristaltic pumpheads.
2. Manufacturer: Watson Marlow Ltd, Bickland Water Road, Falmouth, TR11 4RU, UK
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. The following models and versions of covered:
5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Directive 2014/34/EU (the "ATEX" directive).
The pumpheads carry the following ATEX categorisation:
6. This declaration applies to the pump when using the Watson-Marlow tubing stated within the pumphead manual and in
accordance with the special operating instructions provided in the manual. The use of any other tubing material in the
pump would invalidate this declaration.
7. Harmonised standards used:
EN 80079-36:2016
EN 80079-37:2016
8. Full details of the conformity assessment procedure can be found in the technical reference file, "ATEX-WM". In
accordance with the requirements of Directive 2014/34/EU a copy of this file has been archived with the following
notified body:
SGS Fimko Oy, FI-00211 Helsinki, Finland.
Signed for and behalf of:
Watson Marlow Ltd
Falmouth, 31
Simon Nicholson, Managing Director, Watson-Marlow Limited
Watson-Marlow Fluid Technology Group
Telephone +44 (0) 1326 370370
A Spirax-Sarco Engineering plc company
2

EU declaration of conformity

313DA* 033.3411.A00
313D2A* 033.3511.A00
314DA* 033.4411.A00
314D2A* 033.4511.A00
313BA* 033.3421.A00
313B2A* 033.3521.A00
314BA* 033.4421.A00
314B2A* 033.4521.A00
313XA* 033.3431.A00
314XA* 033.4431.A00
313XBA* 033.3441.A00
314XBA* 033.4441.A00
II 2G IIB h T4 Gb X
st
October 2019
3 roller, tongued drive fitting for 1.6mm wall tubing
3 roller, tongued drive fitting for 2.4mm wall tubing
4 roller, tongued drive fitting for 1.6mm wall tubing
4 roller, tongued drive fitting for 2.4mm wall tubing
3 roller, bareshaft fitting for 1.6mm wall tubing
3 roller, bareshaft fitting for 2.4mm wall tubing
4 roller, bareshaft fitting for 1.6mm wall tubing
4 roller, bareshaft fitting for 2.4mm wall tubing
3 roller, extension head for 1.6mm wall tubing
4 roller, extension head for 1.6mm wall tubing
3 roller, bareshaft extension head for 1.6mm wall tubing
4 roller, bareshaft extension head for 1.6mm wall tubing
m-313-314-atex-12:PB0353/12