Pump Models - Watson Marlow Pumps 300 Serie ATEX Bedienungsanleitung

3

Pump models

The following 313/314 pumpheads are covered by this manual:
313 and 314 ATEX Pumpheads
313DA* 033.3411.A00
313D2A* 033.3511.A00
314DA* 033.4411.A00
314D2A* 033.4511.A00
313BA* 033.3421.A00
313B2A* 033.3521.A00
314BA* 033.4421.A00
314B2A* 033.4521.A00
313XA* 033.3431.A00
314XA* 033.4431.A00
313XBA* 033.3441.A00
314XBA* 033.4441.A00
* NB: these pumpheads are compatible with a number of Watson-Marlow cased drives.
However, the Watson-Marlow cased drives are not ATEX compliant and must not be used in
hazardous locations.
Any 313 or 314 pumpheads not listed here are NOT suitable for use in hazardous
environments (at date of issue).
4
3 roller, tongued drive fitting for 1.6mm
wall tubing
3 roller, tongued drive fitting for 2.4mm
wall tubing
4 roller, tongued drive fitting for 1.6mm
wall tubing
4 roller, tongued drive fitting for 2.4mm
wall tubing
3 roller, bareshaft fitting for 1.6mm wall
tubing
3 roller, bareshaft fitting for 2.4mm wall
tubing
4 roller, bareshaft fitting for 1.6mm wall
tubing
4 roller, bareshaft fitting for 2.4mm wall
tubing
3 roller, extension head for 1.6mm wall
tubing
4 roller, extension head for 1.6mm wall
tubing
3 roller, bareshaft extension head for
1.6mm wall tubing
4 roller, bareshaft extension head for
1.6mm wall tubing
m-313-314-atex-12:PB0353/12