Herunterladen Inhalt Inhalt Diese Seite drucken

Scope Of Delivery; Parts Description; Technical Data; Safety - LIVARNO LUX IAN 339471 1910 Bedienungs- Und Sicherheitshinweise

Led-lichtband mit bewegungssensor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Scope of delivery

Check immediately after unpacking that the parts are
complete and that the product is in proper condition.
1 LED rope light
1 adhesive strip
4 batteries 1.5 V AAA
1 set of instructions for use

Parts description

Sliding switch (Setting "D" or "M" possible)
1
Battery compartment
2
Battery
3
Battery cover
4
Adhesive strip (Reverse side of battery
5
compartment)
ON / OFF button
6
Motion sensor
7
Protective film (Reverse side of LED strip)
8
LED strip
9
Adhesive strip (for LED strip)
10

Technical data

LED Strip:
Model number:
Operating voltage:
Batteries:
Illuminant:
Total wattage:
Protection type:
Range of the motion
detector:
Detection angle:
LED non-replaceable

Safety

Safety instructions

Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
14146506L
DC 6 V
2 W
4 x 1.5 Vd.c. AAA
30 LEDs (non-replaceable)
2 W
IP20
max. 4 m
110°
liability for property damage or personal injury due
to improper handling or failure to comply with the
safety instructions!
DANGER TO LIFE AND ACCI-
DENT HAZARD FOR TODDLERS
AND SMALL CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate dangers. Please always keep the
product out of the reach of children.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
long as they are supervised or instructed in the
safe use of the device and understand the as-
sociated risks. Do not allow children to play
with the device. Cleaning and user maintenance
must not be performed by children without
supervision.
Avoid the risk of fatal injury
from electric shock
Check the LED strip for damage before every
use. Never use the LED strip if any damage is
detected.
CAUTION!
In the case of damage, repairs or other prob-
lems, please contact the service centre or a
qualified electrician. If the cable is damaged,
the appliance must be disposed of. The appli-
ance contains no parts which may be serviced
by the consumer.
Never allow the live power leads and contacts
to come into contact with water or other liquids.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the lamp on damp or conductive
surfaces.
Do not install the LED strip in a flammable,
explosive or corrosive environment.
This LED strip must not be connected electroni-
cally with other LED strips.
Introduction / Safety
GB/IE
15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis