Silvercrest BL DB 1800 B2 Bedienungs- Und Sicherheitshinweise Seite 21

The product is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the power
supply .
The product demands increased
energy consumption . Do not
connect any other devices
(e .g . heaters, air conditioners,
etc .) to the same circuit .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A . Lay cords
in such a way that they may not
be tripped over or otherwise
damaged .
Do not operate any product with
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner .
Only use the product in dry
indoor rooms .
Do not operate the product with
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Protect the product against heat .
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
Regularly check the power plug
and the supply cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
Stop using the product if the anti-
kink protection on the power cord
is damaged!
GB/IE 19