Displaying Stored Results - Gima KD-558 Bedienungsanleitung

29
Picture 6
c. After selecting the memory bank, the monitor starts to seek zero pressure.
See picture 6-3.
d. The monitor inflates the cuff until sufficient pressure has built up for a meas-
urement. Then the monitor slowly releases air from the cuff and carries out
the measurement. Finally the blood pressure and pulse rate will be calculat-
ed and displayed on the LCD screen separately. Irregular heartbeat symbol
(if any) will blink. See picture 6-4&6-5. The result will be automatically stored
in the current memory bank.
Picture 6-3
e. After measurement, the monitor will turn off automatically after 1 minute of
no operation. Alternatively, you can press the "START" button to turn off the
monitor manually.
f. During measurement, you can press the "START" button to turn off the mon-
itor manually.
Note: Please consult a health care professional for interpretation of pressure
measurements.

7. Displaying stored results

a. After the measurement, you can review the measurements in the current
memory bank by pressing button "MEM". Now the LCD displays the amount
of the results in the current bank. See picture 7.
Picture 6-1
Picture 6-4
ENGLISH
Picture 6-2
Picture 6-5