Operating The Pressure Washer; Holding And Controlling The Spray Gun; Squeezing And Locking The Spray Gun Trigger; Cleaning - Stihl RE 90 Gebrauchsanleitung

11 Operating the pressure washer

11 Operating the pressure washer

11.1 Holding and controlling the spray gun

► Hold the spray gun by the handle with one hand, wrapping
your thumb around the handle.
► Hold the spray lance firmly with your other hand, wrapping
your thumb around the spray lance.
► Point the nozzle at the ground.

11.2 Squeezing and locking the spray gun trigger

Pressing the spray gun trigger
0458-002-9621-A
► Move the retaining latch (1) to the
► Press and hold the trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
► Release the trigger (2).
The high-pressure pump switches off automatically and
water stops flowing out of the nozzle. The high-pressure
washer is still switched on.
► Move the retaining latch (1) to the

11.3 Cleaning

According to the application, the following nozzles can be
used:
– Fan-jet nozzle: The fan-jet nozzle is designed for cleaning
large areas.
2
– Rotary nozzle: The rotary nozzle is designed for removing
stubborn dirt.
1
The user can work close up to the surface in order to remove
stubborn dirt.
The user can work at a distance when cleaning any of the
following surfaces:
– Painted surfaces
– Wooden surfaces
– Rubber surfaces
English
position.
2
1
position.
57