Electrical Components Location - Husqvarna TE 125 2012 Bedienungs- Und Wartungsanleitung

ELECTRICAL COMPONENTS LOCATION

The ignition system includes the following elements:
- Generator (1), on the inner side of L.H. crankcase
cover;
- Electronic ignition coil (2) under the fuel tank;
- Electronic control unit (3) under the saddle;
- Voltage regulator (4) on the left side of the chassis,
near the steering tube.
- Spark plug (5) on the R.H. side of the cylinder head;
- 12V-700W Starter motor (6) behind the cylinder;
- Solenoid starter (7) and fuses on right side of rear
chassis;
The electrical system includes the following elements:
- 12V-14Ah Battery (8) under the saddle;
- Turning indicator flasher (9) on left side of rear chas-
sis;
- Relays on left side of rear chassis;
- Electric fan relay (10);
- Horn, turning indicators, stop lights, low and high
beam lights relay (10 A);
- Electric fan (11);
- Fuse (12) on utilities holder plate, on left side of rear
chassis;
30 A fuse - electric fan protection.
- Air temperature sensor (13) inside airbox, under sole-
noid starter.
- Coolant temperature sensor (14);
- Headlamp (15) with twin halogen bulb of 12V-35/35W
and parking light bulb of 12V-5W;
EN - 34 SPECIFICATIONS - OPERATION - MAINTENANCE
- LED taillight (16);
- Turning indicators (17) 12V-10W bulb;
- Heater (18) on left side of the carburettor.
- Horn (19) up front on right side, near the radiator.
1
2
3
8
4
5
11
14