Silvercrest SBTF 10 F2 Bedienungsanleitung Und Sicherheitshinweise Seite 105

SilverCrest SBTF 10 F2
The name of the hands-free kit 'SBTF 10 F2' will now appear in the list of devices
connected to your mobile phone. A corresponding announcement indicates that pairing
was successful. The hands-free kit is now in standby mode and the phone button (4) lights
up blue about once every five seconds. The device goes into search/pairing mode again
and the phone button (4) flashes alternately blue and orange as soon as the connection is
severed. In addition, a voice announcement sounds.
If the connection to the smartphone is interrupted, the hands-free kit goes into
search/pairing mode for about five minutes. When this time has elapsed, a voice message
will sound and the hands-free kit will automatically switch to energy-saving mode. The
hands-free kit is fitted with a shock sensor. As soon as the hands-free kit detects a shock, for
example when closing the car door, it switches automatically from energy saving mode
back to standby mode (Bluetooth connection is reactivated).
You can pair or connect other devices to the hands-free kit in a similar manner. The pairing
begins for each device with the hands-free kit switched off as described above.
Once you have connected a device to the hands-free kit, switch the hands-free kit off and
then on again. The pairing process is now complete.
The hands-free kit then has several 'known' devices. This status is a prerequisite for an
active connection between the hands-free kit and other devices. A maximum of 8 devices
can be stored as 'known devices'. As soon as a ninth device is added, the oldest device is
removed.
English - 103