detergent is swallowed,
seek medical attention
immediately. Note the
manufacturer's safety data
sheets!
Before starting work
Do not connect the
high-pressure
cleaner directly to
the drinking water
main.
Only connect the high-
pressure cleaner to the
drinking water main in
conjunction with a backflow
preventer – see "Special
accessories".
WARNING
If drinking water has
–
passed through the
backflow preventer, it can
no longer be regarded as
drinking water.
Do not use the machine with
dirty water.
If there is a risk that dirty water
will occur (e. g., flowing sand),
an appropriate water filter
must be used.
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
All manuals and user guides at all-guides.com
Inspect the high-pressure
cleaner
WARNING
The high-pressure cleaner
–
should only be used if it is
in full working order and
undamaged – risk of
accident!
It must be possible to
–
move the switch to the 0
position easily
The switch must be in the 0
–
position
Do not use the machine
–
with a damaged high-
pressure hose, spray
attachment and safety
devices
High-pressure hose and
–
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
For good control of the
–
machine, the handles
should be clean and dry
with no oil or dirt on them
Check the oil level
–
Never attempt to modify
–
the controls or safety
devices in any way
Electrical connection
WARNING
Minimize the risk of electrical
shock:
Voltage and frequency of
–
the machine (see rating
plate) must match the
voltage and frequency of
the mains supply
Examine the power cord,
–
power plug and extension
cord for damage. Do not
use the machine with a
damaged connecting cord,
extension cord or
damaged power plug
Only connect the machine
–
to a correctly installed
power socket
The insulation on the
–
power cord and any
extension cord, the plug
and the coupling must be
fully intact
Never touch the power
–
plug, power cord and
extension cord and
electrical plug connections
with wet hands
English
35