Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove
it and lock the side-discharge door; refer to
the Side-Discharge Chute (page
Installing the Grass Bag
1.
Route the starter rope around the lower-rope
guide
(Figure
22).
Figure 22
1. Lower-rope guide
Note:
The lower-rope guide releases the starter
rope when you pull the recoil-start handle.
2.
Raise and hold up the rear door
Figure 23
1. Rear door
3.
Pull out the rear plug
4.
Hang the upper front edge of the bag from the
grass-bag pins on the notches of the handle
brackets
(Figure
Removing
17).
(Figure
2. Rear plug
(Figure
23).
24).
1. Rear door
5.
Lower the rear door.
Removing the Grass Bag
1.
Route the starter rope around the lower-rope
guide
g187599
23).
1. Lower-rope guide
Note:
g187598
rope when you pull the recoil-start handle.
2.
Raise and hold up the rear door.
3.
Lift the grass bag up by the handle off the
notches of the handle brackets.
4.
Install the rear plug
15
Figure 24
2. Grass bag
(Figure
25).
Figure 25
The lower-rope guide releases the starter
(Figure
26).
g189818
g187599