Using The Self-Propel Drive - Toro 53cm Super Recycler 20792 Bedienungsanleitung

Starting the Engine Using the
Recoil-Start Handle
1. Hold the blade-control bar against the handle
(Figure 17).
Figure 17
1. Blade-control bar
2. Pull the recoil-start handle
Figure 18
Note:
When you pull the recoil-start handle,
pull it lightly until you feel resistance, then pull it
sharply (Figure 18). Allow the rope to return to
the handle slowly.
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
g009546
(Figure 18).
g009548
13

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (Figure 19).
Figure 19
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
g009549