Figure 26
1. Rear door
Important:
Ensure that the rear plug is
locked in place. To lock the plug, firmly push
the plug in until it snaps into place behind
the tabs, and rotate the lever on the plug to
the left
(Figure
27).
Figure 27
1. Lever
g187597
2. Rear plug
g010084
2. Tabs
Note:
To unlock the plug, rotate the lever on
the plug to the right
5.
Lower the rear door.
Discharging the Clippings
Side-discharge or rear-discharge the clippings when
cutting very tall grass.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Shut off the engine and wait for all moving
parts to stop before leaving the operating
position.
Side-Discharging the Clippings
If the bag is on the machine, remove it and insert the
rear plug; refer to
Removing the Grass Bag (page
Important:
Ensure that the rear plug is locked in
place. To lock the plug, raise the rear door
28), firmly push the plug in until it snaps into place
behind the tabs, and rotate the lever on the plug
to the left
(Figure
27).
1. Rear door
Note:
To unlock the plug, rotate the lever on the plug
to the right
(Figure
27).
Installing the Side-Discharge Chute
1.
Unlock the side-discharge door
16
(Figure
27).
Figure 28
2. Rear plug
(Figure
Figure 29
15).
(Figure
g187597
29).
g002590