Product Overview; Specifications; Operation; Before Operation - Toro 53cm Super Recycler 20792 Bedienungsanleitung

Product Overview

1. Handle
2. Blade-control bar
3. Electric-start button
(electric-start model only)
4. Washout port (not shown) 10. Oil fill/dipstick
5. Fuel-tank cap
6. Air filter
Figure 10
1. Grass bag
2. Side-discharge chute
Figure 9
7. Cutting-height lever (4)
8. Spark plug
9. Side-discharge door
11. Rear door
12. Recoil-start handle
3. Battery charger
(electric-start model only)

Specifications

Model Weight
20792 36 kg
(79 lb)
20797 38 kg
(83 lb)

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

g189753
General Safety
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
working properly.
•
Always inspect the machine to ensure that the
blades, blade bolts, and cutting assembly are not
worn or damaged.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.
– Shut off the engine, remove the electric-start
button (electric-start model only), and wait for
all moving parts to stop.
g009526
– Do not put your fingers under the housing
when adjusting the cutting height.
9
Length Width Height
165 cm 56 cm 104 cm
(65 (22 (41
inches) inches) inches)
165 cm 56 cm 104 cm
(65 (22 (41
inches) inches) inches)