Display And Delete Measured Values - Beurer BM 57 Gebrauchsanweisung

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measure-
ments.
• Select the desired user memory (
or M2 memory buttons if the device is switched off.
– To view the measurement data for user memory ,
press the M1 memory button.
– To view the measurement data for user memory ,
press the M2 memory button.
The average of all measurements appears on the dis-
play.
If Bluetooth is activated (the symbol will flash on the
®
display), the blood pressure monitor is attempting to
connect to the app. If you press the M1 button in the
meantime, the transfer will be cancelled and the morning
average will be displayed.
If you press the M2 button, the transfer is
cancelled and the measurement data of user
memory is displayed. The
longer shown. The buttons are deactivated as
soon as a connection is established and the
data is transferred.
) using the M1
symbol is no
Press the M1 button if you have selected user memo-
ry 1.
Press the M2 memory button if you have selected
user memory 2.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (mor-
ning: 5.00 a.m. – 9.00 a.m.).
Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (eve-
ning: 6.00 p.m. – 8.00 p.m.).
28