Stopping The Engine; Setting The Gear - Stihl MH 700 Gebrauchsanleitung

English
► Set main switch (1) to the I position.
► Slowly pull out starter handle (2) to the point of noticeable
resistance.
► Keep quickly pulling out and returning starter handle (2)
until the engine is running.
► If the engine does not start: see the engine instruction
manual.
9.1.2

Stopping the Engine

► Place the tiller on a level surface.
► Switch off self-propulsion.
The drive is disengaged and the drive shaft no longer
rotates.
64
► Set main switch (1) to the 0 position.
The engine stops.
9.2

Setting the Gear

Four gears can be set.
– 0/R = Idle/reverse gear
– Idle is used to start the engine or to keep the tiller
stationary with the engine running.
– Reverse gear is used to free the hoes or to position the
tiller.
– 1 = Slow forward gear
– Slow forward gear is selected when loosening firm soil
or when making furrows.
– 2 = Fast forward gear
– Fast forward gear is selected when working soil
additives into loose soil or when tilling loose soil.
9 Starting and Stopping the Tiller
0478-404-9604-A