piomic COMS One Gebrauchsanweisung Seite 19

10. TECHNICAL SPECIFICATIONS (INCL. WARRANTY AND MAINTENANCE)
The COMS One is certified as medical non-laser light source equipment. While in operation
it generates light in the red and near-infrared spectrum around 660 nm and 830 nm. On the
bottom of the device there are four emission apertures for 660 nm LEDs and 830 nm each.
Device
Optical output
classification
Power Density
Maximum treatment dose
Pulse Specifications
Maximum Spectral
Irradiance
Specifications
265 g without Accessories
Medical Device Class lla
18
Ref. 01.0000
Exempt Group according to IEC 62471:2006. Meaning safe under
reasonably foreseeable conditions.
Pulse Peak Power: 25 mW/cm²; Duty cycle: ≈20%;
Average Power: 5 mW/cm²
The local variation across the treatment area between maximum and mini-
mum power density is < factor 2.5
5 J/cm²
Maximum pulse width of 0.3 ms at a repetition rate of 1 KHz for 16 min
treatment.
660nm: 5.5 mW/(m² nm)
830nm: 2.2 mW/(m² nm)
1 13 x 1 10 x 37 mm
Device:
[VDC] 5
[W] 7.5
IP 22
+3 0
+5
10 60 90
700 15
hPa
95
+5 0
Transport/Storage Conditions
-20
20
(also applicable between uses)
10 60
700
hPa
Input: 100-240 VAC, 50/60 Hz 300 mA
Battery (Lithium-Ion)
Rated Capacity 3000 mAh
Operating Conditions
Power Supply
Model S008ACM0500200
Output: 5.0 VDC 2.0 A
USB cable length: 1 m
3.7 VDC