piomic COMS One Gebrauchsanweisung Seite 13

0"
2"
4" 6"
8"
12
3. Carefully open the sterile packaging without touching the
COMStouch.
WARNING
• The COMStouch is for single-use only and cannot be
reused.
4. Take the device and press the On/Off – Button for
longer than 3 seconds to switch the device on.
The device will then do a Power On Self Test. After the
test the device will go into Standby Mode. In Stand-
by Mode the battery indicator will show if the battery
charge level is suffi cient for a full therapy (green,
proceed with next step) or insuffi cient (red, go to chapter
"Battery Charging").
5. Take the COMS One and mount it to the COMStouch.
The proper fi xation of the COMStouch to the COMS
One will be indicated by a click-in noise.
6. Carefully mount the device with the attached consumable
to the patient using the strap (Loops shall face towards
the device / Logo on Logo).
CAUTION
• Fix the strap carefully to ensure no pressure oedemas
are created.
7. Press On/Off-Button (<1s) to start the therapy
(you will hear a single beep and a red shining on the
bottom side of the device)
To pause therapy, press On/Off-Button anytime (<1s).
8. The therapy progress is indicated by the blinking pro-
gress bars. Each one representing 2 minutes elapsed
time.
16"