Possible Cause - piomic COMS One Gebrauchsanweisung

Problem
The charger becomes warm
during charging
The Battery indicator does not
flash green while charging
"
"
The COMS One becomes warm
during use
The COMS One does not react
to button press
Only 4 light sources are emitting
red light on the bottom side of
the device

Possible Cause

This is normal
The charger is not inserted prop-
erly into the wall outlet
The USB plug is not inserted
properly into the charger
The wall socket is not live
This is normal
Battery is very empty
This is normal. The other 4 light
sources emit light in visible to the
human eye
Troubleshooting
No action required
Plug the charger into a wall
outlet properly
Insert the standard USB plug into
the charger properly
Check the wall socket with
another appliance. If the wall
socket is live but the COMS One
does not charge please contact
Piomic Customer Service
No action required
Please charge the device and try
again. If the error persists, con-
tact Piomic Customer Service
No action required.
CAUTION: Do not look
directly into the light source on
the bottom of the device. It may
result in eye injuries
ENGLISH
15