Installation and Operation Instructions
EN
CHAPTER 5
CLEANING/
DISMANTLING
m
DANGER
ATTENTION
MiniVent M1/100/120 P
5.0
Cleaning
m The safety instructions in chapter 1.2 must be observed!
Before cleaning, isolate the fan from the mains power supply and secure against being switched on again!
Clean facia and visible casing parts with a damp cloth
Do not use aggressive, paint-damaging cleaning agents!
High pressure cleaners or jet water is not permitted!
5.1
Dismantling of the facia
Procedure:
1. Isolate fan from mains power supply and secure against being switched on again!
2. By pressing the snap-in hooks, the facia ò can be unlocked and removed (fig. 3/4).
fig.3
ò
Unlock and remove
the facia by pressing
the 2 snap-in hooks.
All subsequent information and instructions are intended solely for aut-
horised electricians!
fig.4
ò
6