Warranty Claims - Exclusion Of Liability; Certificates - Guidelines; Shipping; Receipt - Helios MiniVent M1/100 P Montage- Und Betriebsvorschrift

Installation and Operation Instructions
EN
MiniVent M1/100/120 P
1.3 Warranty claims – exclusion of liability
All versions of this documentation must be observed, otherwise the warranty shall cease to apply. The same
applies to liability claims against Helios. The use of accessory parts, which are not recommended or offered by
Helios, is not permitted. Any possible damages are not covered by the warranty. Changes and modifications
to the unit are not permitted and lead to a loss of conformity, and any warranty and liability shall be excluded
in this case.
1.4

Certificates - guidelines

If the product is installed correctly and used to its intended purpose, it conforms to all applicable EU guidelines
at its date of manufacture.
1.5

Shipping

The fan is packed ex works in such a way that it is protected against normal transport strain. Carry out the
shipping carefully. It is recommended to leave the fan in the original packaging.
1.6

Receipt

The shipment must be checked for damage and correctness immediately upon delivery. If there is any damage,
promptly report the damage with the assistance of the transport company. If complaints are not made within
the agreed period, any claims could be lost.
1.7

Storage

When storing for a prolonged time, the following steps are to be taken to avoid damaging influences: Motor
protection by dry, airtight and dust-proof packaging (plastic bag with desiccant and humidity indicators).
Vibration-free, water-tight and constant-temperature storage at a temperature in the range -20 °C to +40 °C.
In case of a storage period of more than three months or motor standstill, maintenance must be carried out
before start-up according to chapter 4. In case of reshipment (above all, over longer distances; e.g. by sea),
it must be checked whether the packaging is suitable for the form and route of transport. Damages due to
improper transportation, storage or putting into operation are not liable for warranty.
1.8

Application

– Normal use:
The MiniVent M1/100/120 P mini fans are suitable for conveying normal or slightly dusty (particle size < 10
µm), less aggressive and humid air, in moderate climates and in the range of their performance curves, see
Helios sales documents / internet. Operation is only admissible with fixed installation within buildings. The
maximum admissible media and ambient temperature is 40 °C. MiniVent M1/100/120 P mini fans correspond
to protection category IP45, protection class II and may be installed in area 1 wet rooms according to VDE
0100 part 701.
– Reasonably foreseeable misuse:
The fans are not suitable for operation under difficult conditions, such as high levels of humidity, aggressive
media, long standstill periods, heavy contamination, excessive loads due to climatic, technical or electronic
influences. The same applies for the mobile use of fans (vehicles, aircraft, ships, etc.). Usage under these con-
ditions is only possible with release approval from Helios, as the standard version is not suitable in this case.
– Improper, prohibited use:
Any use other than the intended use is not permitted! The conveying of solid matter or solid matter content
> 10µm in air and liquid is not permitted. Transport media, which affect the materials of the fan, and abrasive
media are not permitted. Use in explosive atmospheres is not permitted!
2