Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
CHAPTER 1
GENERAL INFORMATION
m
DANGER
m
m
WARNING
m
CAUTION
ATTENTION
ATTENTION
ATTENTION
Product name
Weight
(w/o
liquid)
AIR1-KR DX XC 500
23
36
AIR1-KR DX XC 700
AIR1-KR DX XC 1400
43
62
AIR1-KR DX XC 2200
AIR1-KR DX XC 3200
79
AIR1-KR DX XH 1000 R
56
AIR1-KR DX XH 1000 L
56
AIR1-KR DX XH 1500 R
63
AIR1-KR DX XH 1500 L
63
Cooling register AIR1-KR DX
1 .0
Important information
In order to ensure correct operation and for your own safety, please read and observe the following instructions care-
fully before proceeding. Important information and necessary cleaning and maintenance activities is specified in the
maintenance section. The cleaning and maintenance work may only be carried out by qualified electricians. The chapter
"Installation and commissioning" with important installation information and basic unit settings is intended for the spe-
cialist installer.
m
The electrical connection must be fully isolated from the mains power supply until final assembly!
This unit is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction con-
cerning use of the unit by a person responsible for their safety . Children should be supervised to ensure that
they do not play with the unit .
Keep the installation and operating instructions with the unit for reference. The document must be handed to the ope-
rator (tenant/owner) after final assembly.
1 .1
Warning and safety instructions
The adjacent symbol is a safety-relevant prominent warning label . All safety regulations and/or symbols must be
absolutely adhered to, so that any dangerous situation is avoided .
m
DANGER
Indicates dangers which will directly result in death or serious injury if the safety instruction is not followed.
m
WARNING
Indicates dangers which will result in death or serious injury if the safety instruction is not followed.
m
CAUTION
Indicates dangers which can result in injuries if the safety instruction is not followed.
ATTENTION
Indicates dangers which can result in material damage if the safety instruction is not followed.
1 .2
Warranty claims – Exclusion of liability
If the preceding instructions are not observed, all warranty claims shall be excluded. This also applies for liability claims
against the manufacturer.
The use of accessories, which are not recommended or offered by Helios, is not permitted. Any possible damages are
not covered by the warranty.
1 .3
Area of application – Intended use
The cooling register is exclusively intended as an accessory for ventilation units in AIR1 series XC, XH or RH.
The intended use also includes observance of the operating manual as well as the inspection and maintenance intervals
stipulated by HELIOS.
Any use other than the intended use is prohibited!
1 .4
Functional description
The cooling registers AIR1-KR DX are designed for external installation on the supply air spigots of the respective AIR1
unit. External cooling registers are used to reduce the supply air temperature.
The cooling register AIR1-KR DX is no replacement for an air conditioning system!
– The capacity of the cooling register can be calculated using the following parameters:
Liquid: R410A
Evaporating temperature: 6 °C
Condensation temperature: 46 °C
Overheating temperature: 5 °C
Subcooling temperature: 3 °C
– The capacities and weights of the cooling register are shown in the table below:
Filling
max .
capacity
operating
pressure
(bar)
0.9
41
1.1
41
1.7
41
2.6
41
3.6
41
1.1
41
1.1
41
1.5
41
1.5
41
Cooling
Protection
Protection
capacity
category IP
category IP
(kW)
(without
(with
cover)
cover)
2.4
31
-
3.2
31
-
6.3
31
-
9.9
31
-
14.2
31
-
2.8
31
56
2.8
31
56
5.8
31
56
5.8
31
56
2
Voltage (V)
Mains
Electrical
frequency
power (W)
(Hz)
230
50
15
230
50
15
230
50
15
230
50
15
230
50
15
230
50
15
230
50
15
230
50
15
230
50
15
EN
Werbung
Kapitel
Inhaltsverzeichnis
