Installation
Fig. 68 Connectors X52 and X277
Fig. 69 Cover
Fig. 70 Hood
54
Plate inlet (bottom)
Plug in X52 (Fig. 68/2) and secure with screws.
Plug in X277 (Fig. 68/1) and engage connector.
Fasten the cover (Fig. 69/1) with 4 M4x8 combi-
nation screws.
In the hood (Fig. 70/5), remove the cover (Fig.
70/1) from the exit slot (Fig. 70/2) and mount the
upper bracing (Fig. 70/3) and the lower bracing
(Fig. 70/4) in this place.
07/2019