HEIDELBERG Suprasetter 106 Installationsanleitung Seite 31

Fig. 18 Transport safeguard bracket, rear right of basket
Fig. 19 Transport safeguard bracket, tray on right
Fig. 20 Support screws, basket
Fig. 21 Conveyor, fastening screws
DCL für Suprasetter 106 – Installation
Loosen the screws of the transport safeguard
bracket on the left (Fig. 18/1) and on the right (Fig.
18/2) and remove the brackets.
Loosen the screws of the four transport safeguard
brackets (Fig. 19/1) and remove the brackets.
Turn the four support screws downward (Fig. 20/1)
until pressure is released from the basket.
Transport safeguard, turntable option
Loosen two screws each on the left and right (Fig.
21/1) of the frame to be able to open the conveyor.
Installation
29