HEIDELBERG Suprasetter 106 Installationsanleitung Seite 38

Installation
Fig. 36 Data cables and compressed air hose
Fig. 37 Data cables and compressed air hose
36
Route data cable X310 (Fig. 36/1) and the com-
pressed air hose (Fig. 36/3) through the hole (Fig.
36/2) into the recorder.
If necessary, tilt the swivel table of the recorder
manually on the motor control gear to an upright
position (Fig. 37/1). Route data cable X310 (Fig.
37/2) along the cable leadthrough below the
swivel table to the right side. Fasten it to the cable
harness with the cable ties.
07/2019