HEIDELBERG Suprasetter 106 Installationsanleitung Seite 27

Fig. 10 Left side covering
Fig. 11 Transport safeguard, separator cover
DCL für Suprasetter 106 – Installation
Tilt open the left side panel (held in place by mag-
nets) at the top and remove the two cable ties (Fig.
10/1) below.
Remove and put aside the left side panel.
Separator transport safeguard
The cover of the separator is fastened by one
bracket on the left (Fig. 11/1) and one bracket on
the right (Fig. 11/1). Loosen the screws and remove
the brackets.
Installation
25