HEIDELBERG Suprasetter 106 Installationsanleitung Seite 30

Installation
Fig. 15 Transport safeguard bracket, separator, on left
Do not damage the spindle
When you remove this transport safeguard, make sure that you do not damage
the spindle (Fig. 15/2).
Fig. 16 Transport safeguard bracket, rear of basket
Fig. 17 Transport safeguard bracket, rear of basket
28
Loosen the screws of the transport safeguard
bracket (Fig. 15/1) and take out the bracket.
NOTICE
Loosen the screws of the transport safeguard
bracket on the right (Fig. 16/1) and on the left (Fig.
16/2) and remove the brackets.
Loosen the screws of the transport safeguard
bracket on the right (Fig. 17/1) and on the left (Fig.
17/2) and remove the brackets.
07/2019