HEIDELBERG Suprasetter 106 Installationsanleitung Seite 32

Installation
Fig. 22 Transport safeguard, conveyor prop
Fig. 23 Conveyor prop
Crushing hazard from parts not properly secured
Make sure the support engages properly in its pivot point! If it does not, you are
in great danger of being crushed when working on the interior of the machine.
Fig. 24 Transport safeguard bracket, front of turntable
30
Remove both cable ties (Fig. 22/1) on the conveyor
prop.
Set up the conveyor and secure it with the prop
(Fig. 23/1).
WARNING
The turntable is secured with four transport safe-
guard brackets. Loosen the screws of the transport
safeguard brackets (Fig. 24/1) and (Fig. 24/2) and
remove the brackets.
07/2019