HEIDELBERG Suprasetter 106 Installationsanleitung Seite 29

Fig. 13 Transport safeguard on left of separator
Fig. 14 Transport safeguard bracket, separator, on right
DCL für Suprasetter 106 – Installation
On the left side in the separator, cut open and
remove the cable tie (Fig. 13/1) for the cylinder, the
cable tie (Fig. 13/2) for the brace and the cable tie
(Fig. 13/3) for the swiveling lever/transport roller.
Loosen the screws of the transport safeguard
bracket (Fig. 14/1) and take out the bracket.
Installation
27