HEIDELBERG Suprasetter 106 Installationsanleitung Seite 39

Fig. 38 EMC seal
Fig. 39 Compressed air hose
Fig. 40 Compressed air hose connection
DCL für Suprasetter 106 – Installation
On the right side, route the data cable past the
outside of the EMC gasket (Fig. 38/1) as far as the
electronics and plug connector X310 to the ACFB
board.
On the left side, push the compressed air hose
(Fig. 39/1) through the tie-bar in the recorder to
the compressed air distributor (Fig. 39/2).
Plug the compressed air hose (Fig. 40/1) onto the
free connection (Fig. 40/2) on the compressed air
distributor.
Installation
37