Hilti PP10 Bedienungsanleitung Seite 20

1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Symbols
Read the Return waste
operating material for
instructions recycling.
before use.
On the tool
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
675-695nm < 5mW max.
CLASS IIIa LASER PRODUCT
Do not stare into the beam.
Laser warning plates for the USA in accordance with CFR
21 § 1040 (FDA).
On the tool
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
520-550nm < 5mW max.
CLASS IIIa LASER PRODUCT
Do not stare into the beam.
Laser warning plates for the USA in accordance with CFR
21 § 1040 (FDA).
On the tool
3R
Laser warning plate in accordance with IEC825 /
EN60825-1:2003
All manuals and user guides at all-guides.com
Type identification plate
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
Made in Japan
Hilti= registered trademark of the Hilti Corporation, Schaan, Liechtenstein
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
620-690nm < 5mW max.
CLASS IIIa LASER PRODUCT
Item No.: 319781
Date .:
PP 10
Type identification plate
Hilti= trademark of the Hilti Corporation, Schaan, LI
DANGER
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
520-550nm < 5mW max.
CLASS IIIa LASER PRODUCT
Item No.: 419291
Date .:
PP 25
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
PP 10
3R
EN 60825-1:2003
This Laser Product
complies with 21CFR
1040 as applicable
Power: 6.0V=nom./250 mA
PP 25 02
Made in Japan
3R
EN 60825-1:2008
This Laser Product
complies with 21CFR
1040 as applicable
Power: 6.0V=nom./250 mA
en
15