Clatronic ar 686 CD Bedienungsanleitung Seite 64

GB
1. Button
Press the
2. +/- Button (Volume)
During normal playback these buttons are used to set the volume. If the SEL
button is pressed beforehand, changes can be made in the menus, e.g. sound
mode.
3. SEL Button (Select)
Press the SEL button briefl y to access the sound mode selection menu.
The letters „VOL" appear in the display for setting the volume. By repeatedly
pressing the SEL button you can now select the individual menu items such as
VOL (Volume), bAS (Bass), TRE (Treble), bAL (Balance) and FAd (Fade). The
settings of the individual menu items are changed using the „+" or „-" button.
Note: If equaliser settings such as POP and ROC(K) have been selected
under EQ it is not possible to adjust the bAS and TRE .
4. On/Off Button
Press this button to switch the device on and off.
5. LCD (liquid crystal display)
6. BAND button
a) Radio Operation
Press the BAND button briefl y in order to switch between the FM levels and
AM (medium wave). The designation of the corresponding level FM or AM
appears in the LCD display.
b) CD Operation
By pressing the BAND button during CD operation you can return to radio
mode.
7./8. I / I Buttons TRACK UP/DOWN
In CD mode:
Press the I
would like to scroll the titles of the tracks keep the I
pressed.
9. TUNE Control
By turning the TUNE control you can set the desired radio frequency. The
current frequency is shown in the display.
10. MUTE Button (Mute)
Press the MUTE button to switch off the loudspeakers for a short period.
MUTE appears in the display. Press this button again to cancel the mute
function.
64
05-AR 686 + CZ 64
Operation
button to remove the front operating panel.
or I button briefl y to jump forwards or backwards. If you
or I arrow button
01.09.2005, 11:08:57 Uhr