Set Your Appliance To 'On; Set Your Appliance To 'Standby' And 'Off - Atag CM46 D Serie Bedienungsanleitung

OPERATION

Set your appliance to 'On'

The appliance is ready to use if it has reached the correct temperature.
The primary screen is shown.
Attention
Each time the appliance is set to 'On', it performs an automatic preheat and rinse cycle.
This cycle cannot be interrupted. The appliance is ready for use only after completion of
this cycle.
Tip
Put a cup under the spouts. Collect the hot water from the rinse cycle to warm the cup.
Important!
Do not push the main switch while the appliance is set to 'On'.

Set your appliance to 'Standby' and 'Off'

Attention
Each time the appliance is set to 'Standby' after being used to make coffee, it performs
an automatic rinse cycle.
Please note
If you do not use the appliance for a long period, set the appliance to 'Off'.
EN 12