Clean The Hot Water Spout; Clean The Internal Tubes Of The Milk Container And The Nozzle - Atag CM46 D Serie Bedienungsanleitung

MAINTENANCE

Clean the hot water spout

Clean the hot water spout each time you used it to froth milk. This avoids the build-up of milk
residues and prevents it from clogging.
2x
Wait a few minutes for the hot water spout to cool down.
Wash all parts of the spout thoroughly with a sponge and warm water.

Clean the internal tubes of the milk container and the nozzle

Each time a milk-based hot drink is supplied, the display shows a CLEAN message. Put an
empty cup under the milk spout before you obey this instruction shown on the display. Let the
milk container stay in the appliance (you do not need to empty it).
Danger of burns
When cleaning the internal tubes of the milk container, a little hot water and steam leak
out of the frothed milk spout. Avoid contact with splashes of water.
The cleaning stops automatically.
EN 21