Special Functions
Alternative Capacity Indicator (lamphead)
1.
Before activating the alternative capacity indicator, your battery must be fully charged.
2.
Press and hold the button until 2 green
release the button
3.
The range of battery capacities you can choose from
will start automatically.
4.
You must approximate the correct range for
your battery; e.g., for an 6.6Ah you would
select 7 Ah (5 green LEDs).
Similair to our Smartcore batteries the red
LEDs on the lamphead will now approxi-
matley show the remaining capacity.
Attention! When the lamp-head is discon-
nected from a battery, the indicator will
not work correctly until the battery is fully
recharged
Example: 70% Remaining capacity =
3 red LEDs on, 1 red LED blinking
2 8
LEDs light up.
3 Ah
4 Ah
5 Ah
6 Ah
7 Ah
8 Ah
9 Ah
10 Ah
Disable indicator
Default setting
Adjusting backlight low-battery warning:
Use this program to adjust the onset of the low-battery warning.
1.
Press and hold the button, until 3 green
release the button
2.
The threshold can be selected as shown below.
Backlight:
red
blue
green
6.0 V
5.6 V
5.2 V
6.2 V
5.8 V
5.3 V
6.4 V
6.0 V
5.4 V
Default setting
6.6 V
6.2 V
5.5 V
6.8 V
6.4 V
5.6 V
Recover factory settings:
1.
Press and hold the button, until 5
red
LEDs turn on.
release the button
2.
Disconnect the battery, and all factory settings will be restored.
LEDs light up.
29